Unpacking, installing and setting up the printer
Switching the printer on and off
CAUTION
Improper handling may result in damge to the printer!
➜
Never switch off the printer while a print job is in progress, the printer
is receiving data from the computer (flashing "Stand-by" lamp on the
control panel) or the printer is being reset.
➜
Switch the power switch to "I" (ON)
in order to activate the printer.
The printer is ready for use after
approx. 23 seconds.
➜
Switch the power switch to
"0" (OFF) in order to deactivate the
printer.
Saving energy makes sense!
After the printer has not received a print command for a certain amount
of time, it automatically switches to POWER SAVE mode. This time
interval can be set using the control panel (see the Online manual).
If the printer receives a new print job while it is in Power Save mode,
or if the side cover is opened, or if the [ON LINE] key is pressed, the
printer automatically starts its warm-up phase.
PagePro 4100E
2
2-13