MINOLTA-QMS PagePro 4100E User Manual page 121

8
7
Refit the side cover and secure it with the two screws.
8
Close the printer cover and fold out the paper output tray.
9
Print out a configuration page for the printer, see page 2-14.
The new total memory capacity should be shown correctly.
?
What if the total amount of memory is not displayed correctly?
➜ Check whether the modules were installed correctly.
➜ Check the setting in the printer driver.
You wish to remove a memory module?
To remove a module, press the tabs on both sides of the installation
slot outwards. This will release the module and allow you to take it out.
8-8
Installing optional accessories
PagePro 4100E