Unpacking, installing and setting up the printer
Connecting the printer to a computer (parallel port)
1
Switch off the printer and the computer.
2
Connect one end of the interface cable to the parallel port of your
computer.
3
Connect the other end of the interface cable to the parallel port of the
printer.
4
Secure the connectors by means of the clips on the sockets.
For the technical specification of the cable, see page 11-5.
CAUTION
Using the wrong type of cable may result in damage to the
equipment!
Using the wrong type of cable may damage the socket on the printer.
➜
Only use an IEEE 1284 type B shielded interface cable for connecting
the printer to your computer.
➜
Minolta/QMS does not warrant the use of any particular cable. The
user assumes all responsibility as to the quality and performance of
the cable.
PagePro 4100E
2
2-15