Working with the DOS printer tools
6
Working with the DOS printer tools
6.1
Using the Status Display
Calling up the Status Display
Call up the Status Display in order to check the printer and the progress
of print jobs.
1
Change to the directory into which the printer driver files were copied
upon installation.
Enter, for example: cd c:\pp4100
2
Enter the following command in order to load the Status Display:
status
The Status Display is loaded into the RAM and can then be called up.
3
Press the keys [CTRL]+[ALT]+[R] to call up the Status Display.
Deleting the Status Display from the RAM!
Enter the command status /d in order to delete the Status Display
from the RAM.
PagePro 4100E
6
6-1