6
Switching on/off the Power Save mode
In order to save energy, the printer automatically switches to the Power
Save mode after a certain period of inactivity. When the printer receives a
new command or the control button is pressed while in this mode, the
printer automatically switches to the warm-up phase.
➜
Select "ON" and enter a time period after which the printer should
switch to the Power Save mode.
➜
Select "OFF" to deactivate the Power Save mode.
Switching on/off the paper format error detection
You can specify whether the printer should respond when the paper fed
into the machine is different to that set in the printer driver.
➜
Select "ON" to detect paper format errors.
➜
Select "OFF" to ignore paper format errors.
Pre-Heat feature
You can specify whether the fusing unit is to be heated up after receiving
a print job.
➜
Select "ON" to heat the fusing unit as soon as a print job is sent from
the computer.
➜
Select "OFF" to suppress preheating of the fusing unit as soon as a
print job is sent from the computer.
Switching on/off the automatic continuation function
A print job is interrupted if the printer signals a format error or memory
overflow. The "Auto continue" function enables you to determine whether
the print job should continue automatically after a certain time has elapsed
despite the presence of an error message.
➜
Select "ON" and enter a time period after which the a print job should
be automatically continued despite the error.
➜
Select "OFF" to suppress the automatic continuation function.
6-16
Working with the DOS printer tools
PagePro 4100E