Table of Contents
Advertisement
Expansion Slots
This mainboard has one AGP, one CNR and two 32-bit PCI slots.
CNR1
PCI2
PCI1
Follow the steps below to install one AGP/CNR/PCI expansion
card.
1. Locate the AGP, CNR or PCI slots on the mainboard.
2. Remove the blanking plate of the slot from the system chassis.
3. Install the edge connector of the expansion card into the slot.
Ensure the edge connector is correctly seated in the slot.
4. Secure the metal bracket of the card to the system chassis with
a screw.
AGP1
18
Advertisement
Table of Contents
