Table of Contents
Advertisement
Quick Links
Mainboard User's Manual
This publication, including all photographs, illustrations and
software, is protected under international copyright laws, with all
rights reserved. Neither this manual, nor any of the material
contained herein, may be reproduced without the express written
consent of the manufacturer.
The information in this document is subject to change without
notice. The manufacturer makes no representations or warranties
with respect to the contents hereof and specifically disclaims any
implied warranties of merchantability or fitness for any particular
purpose. Further, the manufacturer reserves the right to revise this
publication and to make changes from time to time in the content
hereof without obligation of the manufacturer to notify any person
of such revision or changes.
Trademarks
IBM, VGA, and PS/2 are registered trademarks of International
Business Machines.
Intel, Pentium/II/III, Pentium 4, Celeron and MMX are registered
trademarks of Intel Corporation.
Microsoft, MS-DOS and Windows NT/95/98/ME/2000/XP are
registered trademarks of Microsoft Corporation.
PC-cillin is a registered trademark of Trend Micro Inc.
AMI is a registered trademark of American Megatrends Inc.
A3D is a registered trademark of Aureal Inc.
MediaRing Talk is a registered trademark of MediaRing Inc.
3Deep is a registered trademark of E-Color Inc.
SiS is a trademark of Silicon Integrated System Corporation.
Other names used in this publication may be trademarks and are
acknowledged.
Copyright © 2001
All Rights Reserved
M935 Series, V5.0A
S650/March 2002
Advertisement
Table of Contents
Related Manuals for PCchips M935 Series
Summary of Contents for PCchips M935 Series
- Page 1 3Deep is a registered trademark of E-Color Inc. SiS is a trademark of Silicon Integrated System Corporation. Other names used in this publication may be trademarks and are acknowledged. Copyright © 2001 All Rights Reserved M935 Series, V5.0A S650/March 2002...
- Page 2 Mainboard User’s Manual Notice: Owing to Microsoft’s certifying schedule is various to every supplier, we might have some drivers not certified yet by Microsoft. Therefore, it might happen under Windows XP that a dialogue box (shown as below) pop out warning you this software has not passed Windows Logo testing to verify its compatibility with Windows XP.
-
Page 3: Table Of Contents
Mainboard User’s Manual Table of Contents Chapter 1: Introduction..............1 Key Features................2 Package Contents..............6 Static Electricity Precautions..........7 Pre-Installation Inspection............7 Chapter 2: Mainboard Installation..........9 Mainboard Components............10 I/O Ports................11 Install A CPU................10 Installing Memory Modules..........13 Setting Jumper Switches............14 Install the Mainboard............15 Install the Extension Brackets..........16 Optional Extension Brackets..........18 Install Other Devices............19 Expansion Slots ..............21... - Page 4 Mainboard User’s Manual...
-
Page 5: Chapter 1: Introduction
1: Introduction Chapter 1 Introduction This mainboard has a Socket-478 processor socket for Intel Pentium 4 type of processors supporting front side bus (FSB) speeds up to 400 MHz. This mainboard integrates the SiS650/650GL/651 Northbridge along with SiS961/962 Southbridge chipsets that supports built-in AC97 Codec , 2 DDR + 2 SDR modules up to 2GB system memory, and provides Ultra DMA 33/66/100 function. -
Page 6: Key Features
Mainboard User’s Manual Key Features The key features of this mainboard include: Socket-478 Processor The PGA Socket 478 Supports Intel Pentium 4 series CPUs Supports up to 400/533 MHz Front-Side Bus (only SiS651 NB supports 533MHz) Chipset There are SiS650/650GL/651 Northbridge and SiS961/962 Southbridge in this chipset in accordance with an innovative and scalable architecture with proven reliability and performance. - Page 7 1: Introduction Onboard IDE channels Primary and Secondary PCI IDE channels Support for PIO (programmable input/output) modes Support for Multiword DMA modes Support for Bus Mastering and Ultra DMA ATA 100/133 modes Power Supply and Power Management ...
- Page 8 Mainboard User’s Manual Built-in Ethernet LAN Built-in 10BaseT/100BaseTX Ethernet LAN SiS961 Embedded Fast Ethernet MAC and onboard Realtek RTL8201 LAN PHY compliant with IEEE802.3u 100BASE-TX, 10BASE-T and ANSI X3.263 TP-PMD standards Compliant with ACPI 1.0 and the Network Device Class Power Management 1.0 ...
- Page 9 1: Introduction PCI multi-function device consists of two UHCI Host Controller cores for full-/low-speed signaling and one EHCI Host Controller core for high-speed signaling Root hub consists 4 downstream facing ports with integrated physical layer transceivers shared by UHCI and EHCI Host Controller ...
-
Page 10: Package Contents
Mainboard User’s Manual Package Contents Attention: This mainboard serial has four models, M935DAULR(DIP, SiS651 NB+SiS962 SB,USB2.0,LAN Ready), M935DELR(DIP, SiS650L NB+SiS961 SB, without AGP 4x slot, LAN Ready), M935DLR(DIP, SiS650 NB+ SiS961 SB, LAN Ready)and M935D(without LAN). Please contact your local supplier for more information about your purchased model. -
Page 11: Static Electricity Precautions
1: Introduction Static Electricity Precautions Components on this mainboard can be damaged by static electricity. Take the following precautions when unpacking the mainboard and installing it in a system. 1. Keep the mainboard and other components in their original static-proof packaging until you are ready to install them. 2. - Page 12 Mainboard User’s Manual...
-
Page 13: Chapter 2: Mainboard Installation
2: Mainboard Installation Chapter 2 Mainboard Installation To install this mainboard in a system, please follow the instructions in this chapter: Identify the mainboard components Install a CPU Install one or more system memory modules Verify that all jumpers or switches are set correctly ... -
Page 14: Mainboard Components
Mainboard User’s Manual Mainboard Components Use the diagram below to identify the major components on the mainboard. Note: Any jumpers on your mainboard that do not appear in the illustration above are for testing only. -
Page 15: I/O Ports
2: Mainboard Installation I/O Ports The illustration below shows a side view of the built-in I/O ports on the mainboard. 1. Upper PS/2 port connects a PS/2 pointing device. 2. Lower PS/2 port connects a PS/2 keyboard. 3. USB ports connect USB devices. LPT1 connects printers or other parallel communications devices. - Page 16 Mainboard User’s Manual Install A CPU This mainboard has a Socket-478 which supports Intel Pentium 4 series processors. To ensure reliability, ensure that your processor has a heatsink/cooling fan assembly. Do neither try to install a Socket 370 processor nor a Socket423 in the Socket-478.
-
Page 17: Installing Memory Modules
2: Mainboard Installation 5. Swing the locking lever down and hook it under the catch on the side of the socket. This secures the CPU in the socket. 6. All processors should be installed with a combination heatsink/ cooling fan, connect the cable from the fan to the CPU fan power connector JP1. -
Page 18: Setting Jumper Switches
Mainboard User’s Manual Installation Procedure The mainboard accommodates two memory modules. You must install at least one module in any of the three slots. Each module can be installed with up to 2GB system memory. Refer to the following to install the memory modules. 1. -
Page 19: Install The Mainboard
2: Mainboard Installation Jumper JP3: Clear CMOS Memory This jumper can clear the contents of the CMOS memory. You may need to clear the CMOS memory if the settings in the Setup Utility are incorrect and prevent your mainboard from operating. To clear the CMOS memory, disconnect all the power cables from the mainboard and then move the jumper cap into the CLEAR setting for a few seconds. -
Page 20: Install The Extension Brackets
Mainboard User’s Manual Signal Signal SPKR Connect the case switches and indicator LEDs to the SW1 header. Here is a list of SW1 header’s pin assignments. Signal Signal HDDLED_P FP ACPI LED HDDLED_N FP ACPI LED RST_SW_N PW_BT_P RST_SW_P PW_BT_N RSVD_DNU If there are a headphone jack or/and a microphone jack on the front panel, connect the cables to the AUDIO1 header on the mainboard. - Page 21 2: Mainboard Installation VGA Extension Bracket The VGA extension bracket has a 15-pin connector for an external monitor cable. VGA1 VGA Extension Bracket 1. On the mainboard, locate the VGA header for this bracket. 2. Plug the cable from the bracket into the header. 3.
-
Page 22: Optional Extension Brackets
Mainboard User’s Manual Optional Extension Brackets For this mainboard, you can also obtain a USB module extension bracket for more USB ports. Install them by following the steps below. Note: All the ribbon cables used on the extension brackets have a red stripe on the Pin-1 side of the cable. -
Page 23: Install Other Devices
2: Mainboard Installation Install Other Devices Install and connect other devices in the system as steps below. IDE2 FLOPPY IDE1 Floppy Disk Drive The mainboard ships with a floppy disk drive cable that can support one or two drives. Drives can be 3.5” or 5.25” wide, with capacities of 360K, 720K, 1.2MB, 1.44MB, or 2.88MB. - Page 24 Mainboard User’s Manual If you want to install more IDE devices, you can purchase a second IDE cable and connect one or two devices to the Secondary IDE channel connector IDE2 on the mainboard. If you have two devices on the cable, one must be Master and one must be Slave. Internal Sound Connections If you have installed a CD-ROM drive or DVD-ROM drive, you can connect the drive audio cable to the onboard sound system.
-
Page 25: Expansion Slots
2: Mainboard Installation 1. Locate the infrared port IR1 header on the mainboard. 2. If you are adding an infrared port, connect the ribbon cable from the port to the IR header and then secure the port to an appropriate place in your system chassis. Signal Signal IRTX... - Page 26 Mainboard User’s Manual AMR Slot The AMR (Audio Modem Riser) slot is an industry standard slot that allows for the installation of a special audio/modem riser card. Different territories have different regulations regarding the specifications of a modem card. You can purchase an AMR card that is approved in your area and install it directly into the AMR slot.
-
Page 27: Chapter 3: Bios Setup Utility
3: BIOS Setup Utility Chapter 3 BIOS Setup Utility Introduction The BIOS Setup Utility records settings and information about your computer such as the date and time, the kind of hardware installed, and various configuration settings. Your computer uses this information to initialize all the components when booting up and functions as the basis for coordination between system components. -
Page 28: Running The Setup Utility
Mainboard User’s Manual Running the Setup Utility Each time your computer starts, before the operating system loads, a message appears on the screen that prompts you to “Hit <DEL> if you want to run SETUP”. When you see this message, press the Delete key and the Main menu page of the Setup Utility appears on your monitor. -
Page 29: Standard Cmos Setup Page
3: BIOS Setup Utility Standard CMOS Setup Page Use this page to set basic information such as the date, the time, the IDE devices, and the diskette drives. If you press the F3 key, the system will automatically detect and configure the hard disks on the IDE channels. -
Page 30: Advanced Setup Page
Mainboard User’s Manual Advanced Setup Page Use this page to set more advanced information about your system. Take some care with this page. Making changes can affect the operation of your computer. AMIBIOS SETUP – ADVANCED SETUP (C) 2000 American Megatrends, Inc. All Rights Reserved Quick Boot Enabled Spread Spectrum... - Page 31 3: BIOS Setup Utility Quick Boot If you enable this item, the system starts up more quickly be elimination some of the power on test routines. Boot Device Use these items to determine the device order the computer uses to look for an Boot Device operating system to load at start-up time.
-
Page 32: Power Management Setup Page
Mainboard User’s Manual DRAM CAS# Latency This item determines the operation of DRAM memory CAS (column address strobe). It is recommended that you leave this item at the default value. The 3T setting requires faster memory that specifically supports this mode. Timing Setting Mode This item determines the timing setting mode of the memory. - Page 33 3: BIOS Setup Utility ACPI Aware O/S Enable this item if you are using an O/S that supports ACPI function such as Windows 98/ME / 2000. Power Use this item to select a power management scheme. Both APM and ACPI are supported. Management Suspend Time Out This sets the timeout for Suspend mode in...
-
Page 34: Pci/Plug And Play Setup Page
Mainboard User’s Manual PCI / Plug and Play Setup Page This page sets some of the parameters for devices installed on the PCI bus and devices that use the system plug and play capability. AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP (C) 2000 American Megatrends, Inc. -
Page 35: Load Optimal Settings
3: BIOS Setup Utility Load Optimal Settings If you select this item and press Enter a dialog box appears. If you press Y, and then Enter, the Setup Utility loads a set of fail-safe default values. These default values are not very demanding and they should allow your system to function with most kinds of hardware and memory chips. -
Page 36: Features Setup Page
Mainboard User’s Manual Features Setup Page This page sets some of the parameters for peripheral devices connected to the system. AMIBIOS SETUP – FEATURES SETUP (C) 2000 American Megatrends, Inc. All Rights Reserved OnBoard FDC Enabled OnBoard Serial PortA 3F8h/COM1 OnBoard Serial PortB 2F8h/COM2 Serial Port2 Mode... - Page 37 3: BIOS Setup Utility Parallel Port Mode Use this item to set the parallel port mode. You can select SPP (Standard Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or ECP + EPP. Parallel Port IRQ Use this item to assign either IRQ 5 or 7 to the parallel port.
-
Page 38: Cpu Pnp Setup Page
Mainboard User’s Manual CPU PnP Setup Page This page lets you manually configure the mainboard for the CPU. The system will automatically detect the kind of CPU that you have installed and make the appropriate adjustments to the items on this page. AMIBIOS SETUP –... -
Page 39: Hardware Monitor Page
3: BIOS Setup Utility Hardware Monitor Page This page sets some of the parameters for the hardware monitoring function of this mainboard. AMIBIOS SETUP – HARDWARE MONITOR (C) 2000 American Megatrends, Inc. All Rights Reserved *** System Hardware *** Vcore 1.632V Vcc 1.8V 2.512V... -
Page 40: Change Password
Mainboard User’s Manual Change Password If you highlight this item and press Enter, a dialog box appears which lets you enter a Supervisor password. You can enter no more than six letters or numbers. Press Enter after you have typed in the password. -
Page 41: Chapter 4: Software & Applications
4: Software & Applications Chapter 4 Software & Applications Introduction This chapter describes the contents of the support CD-ROM that comes with the mainboard package. The support CD-ROM contains all useful software, necessary drivers and utility programs to properly run our products. More program information is available in a README file, located in the same directory as the software. -
Page 42: Installing Support Software
Mainboard User’s Manual Installing Support Software 1.Insert the support CD-ROM disc in the CD-ROM drive. 2.When you insert the CD-ROM disc in the system CD-ROM drive, the CD automatically displays an Auto Setup screen. 3.The screen displays three buttons of Setup, Browse CD and Exit on the right side, and three others Setup, Application and ReadMe at the bottom. - Page 43 4: Software & Applications Auto-Installing under Windows 98/ME/2000/XP If you are under Windows 98/ME/2000/XP, please click the Setup button to run the software auto-installing program while the Auto Setup screen pops out after inserting the support CD-ROM: 1. The installation program loads and displays the following screen.
-
Page 44: Bundled Software Insatllation
Mainboard User’s Manual Installing under Windows NT or Manual Installation If you are under Windows NT, the auto-installing program doesn’t work out; or you have to do the manual installation, please follow this procedure while the Auto Setup screen pops out after inserting the support CD-ROM: 1.