PCchips M935D Series Manual page 45

OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
Use these items to enable or disable the
Port
onboard COM1 serial port, and to assign a
port address.
OnBoard IR Port
Use this item to enable or disable the onboard
infrared port, and to assign a port address.
Onboard Parallel
Use this item to enable or disable the onboard
Port
LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
Parallel Port Mode
Use this item to set the parallel port mode.
You can select SPP (Standard Parallel Port),
ECP (Extended Capabilities Port), EPP
(Enhanced Parallel Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to
the parallel port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port. The options are 0, 1 and 3.
Onboard PCI IDE
Use this item to enable or disable either or
both of the onboard Primary and Secondary
IDE channels.
Audio Device
This item enables or disables the onboard
AC'97 audio chip.
Modem Device
This item enables or disables the onboard
AC'97 modem chip.
Ethernet Device
This item enables or disables the onboard
Ethernet LAN.
Onboard USB
Enable this item if you plan to use the USB
Function
ports on this mainboard.
29