Table of Contents
Advertisement
Power
Use this item to select a power management
Management
scheme. Both APM and ACPI are supported.
Suspend Time Out
This sets the timeout for Suspend mode in
minutes. If the time selected passes without
any system activity, the computer will enter
power-saving Suspend mode.
Hard Disk Time
This sets the timeout to power down the hard
Out
disk drive, if the time selected passes without
any hard disk activity.
Resume On RTC
The system can be turned off with a software
Alarm Date / Hour /
command. If you enable this item, the system
Minute / Second
can automatically resume at a fixed time
based on the system's RTC (realtime clock).
Use the items below this one to set the date
and time of the wake-up alarm. You must use
an ATX power supply in order to use this
feature.
LAN/Ring Power
The system can be turned off with a software
On
command. If you enable this item, the system
can automatically resume if there is an
incoming call on the Modem. You must use
an ATX power supply in order to use this
feature.
KeyBoard Power
If you enable this item, you can turn the
On
system on and off by pressing hot keys on the
keyboard. You must enable the Keyboard
Power On jumper and use an ATX power
supply in order to use this feature.
26
Advertisement
Table of Contents
