Solving Other Problems - Konica Minolta magicolor 1650en User Manual

Solving Other Problems

Symptom
Printer
power is not
on.
The control
panel dis-
plays
TONER
LOW
sooner than
expected.
You can't
print the con-
figuration
page.
Solving Other Problems
Downloaded From ManualsPrinter.com Manuals
To order KONICA MINOLTA consumables, go to www.q-shop.com.
Cause
The power cord is not
correctly plugged into
the outlet.
Something is wrong
with the outlet con-
nected to the printer.
The power switch is
not correctly turned
on (I position).
The printer is con-
nected to an outlet
with a voltage or fre-
quency that does not
match the printer
specifications.
One of the toner car-
tridges may be defec-
tive.
X
You printed with
much
heavy toner cover-
age.
The tray is empty.
There is a media
misfeed.
Solution
Turn off the printer, confirm that the
power cord is correctly plugged into the
outlet, and then turn on the printer.
Plug another electrical appliance into
the outlet and see whether it operates
properly.
Turn the power switch off (O position),
then turn it back to the on (I position).
Use a power source with the specifica-
tions listed in appendix A, "Technical
Specifications".
Remove the toner cartridges and check
each for damage. If one or more is
damaged, replace it.
See specifications in appendix A,
"Technical Specifications".
Check that at least Tray 1 is loaded
with media, in place, and secure.
Clear the media misfeed.
8-21