S
S
UPER
ERVER 6017R-M7UF/6017R-M7RF User's Manual
1-2
Serverboard Features
At the heart of the SuperServer 6017R-M7UF/6017R-M7RF lies the X9DRL-7F, a
dual processor serverboard based on the Intel® PCH C602J chipset. Below are the
main features of the X9DRL-7F. See Figure 1-1 for a block diagram of the chipset.
Processors
The X9DRL-7F supports dual Intel
2011). Please refer to the serverboard description pages on our web site for a
complete listing of supported processors (www.supermicro.com).
Memory
The X9DRL-7F has eight DIMM slots that can support up to 256 GB of 240-pin
DDR3-1600/1333/1066/800 Registered (RDIMM)/Load Reduced (LRDIMM) ECC or
Unbuffered (UDIMM) ECC/Non-ECC DIMM modules. Memory modules of the same
size and speed should be used. See Chapter 5 for details.
SAS/SATA
A SATA controller is integrated into the chipset to provide a six-port Serial ATA
subsystem 4x SATA 2.0 and 2x SATA 3.0 ports). In addition, the X9DRL-7F has
an LSI 2208 controller to support eight SAS ports. The SAS and SATA drives are
hot-swappable units.
PCI Expansion Slots
The system supports one PCI-Express 3.0 x8 card with the use of the installed
riser card.
I/O Ports
The color-coded I/O ports include a COM port, a VGA port, four USB 2.0 ports, two
Gb LAN (NIC) ports and a dedicated IPMI LAN port.
®
E5-2600 Series processors (Socket R-LGA
1-2