Warnings And Safety Precautions; Battery Care And Charging - Kodak Smile+ User Manual

Digital instant print camera
Hide thumbs Also See for Smile+:
Table of Contents

Advertisement

9. WARNINGS AND SAFETY PRECAUTIONS

– This camera is not waterproof or water-resistant. Exercise caution when using near water.
– Do not use the camera while you are walking, driving, or riding a motorcycle, as these actions may result
in accidents.
– Do not point the flash close to anyone's eyes. This may cause harm to the person's eyesight.
– Turn the power off if:
1. Foreign objects or water enter the camera.
2. The camera has been dropped or damaged.
– Continued use after the foregoing issues may cause personal injury. Service should only be performed by a
qualified technician.
– Use the camera in a well-ventilated area. Do not wrap the camera or place it in cloth or blankets. This may
cause heat to build up and deform the housing, resulting in personal injury.
– Do not let sand or other particles get inside the camera, as damage may occur.
– Do not leave your camera or the Kodak Zink photo paper in places where the temperature may rise
significantly, such as inside a car or under direct sunlight. This may affect the performance of
the product.
– This camera is a precision instrument. Do not drop, strike, or use excessive force when handling the camera.
– Before moving the camera, disconnect all cords and cables. Failure to do so may damage cords and cables,
resulting in personal injury or damage to the product.
– For optimal performance, use your Kodak Smile+ Digital Instant Print Camera in temperatures between 60°F
and 90°F (15.6°C and 32.2°C) and between 20% to 80% relative humidity.
– During extended use, your camera may feel warm to the touch. This is a normal operating occurrence and
does not indicate any product defect or reason to slow down the fun.

10. BATTERY CARE AND CHARGING

Please carefully read and follow these guidelines.
– Your Kodak Smile+ Digital Instant Camera is equipped with a built-in, non-removable 7.4V
lithium-ion battery.
– To charge your camera, plug it into a wall outlet using the included USB-C cable and a wall adapter. The
battery LED indicator will glow red until the battery is fully charged.
– Your Kodak Smile+ may take up to 2 hours to fully charge.
12

Advertisement

Table of Contents
loading

Table of Contents