Camera/Computer Communications; Lcdscreenmessages - Kodak EASYSHARE M1063 Extended User Manual

Troubleshooting
Camera/computer communications
If.,i
Thecomputerdoes
not communicate
with the camera.
Cannot transfer
pictures.
(TheAdd New
HardwareWizard
cannot locate
drivers.)
Slideshow stopsor
doesnot runon an
externalvideo
device.
Turnon the camera(seepage3).
Makesurethe batteryis fully charged(seepage2).
Connectthe USBcable to cameraand computerport (seepage37).
Installthe software(seepage 36).
Disconnect t he USBcable.Closeall softwareapplications.Re-install
the software(seepage 36).
Disconnect c amerafrom the computer.Closeall softwareapplications,
reconnectcamera.
Disconnect t he USBcable.(If using cameradock or printer dock,
disconnectcable and removecamerafrom dock). Closeall open
applications.Re-installthe software(seepage 36).
Disconnect t he USBcable.Closeall softwareapplications.Re-install
the software(seepage 36).
Rebootthe computer.
Tryanother computer.
Adjust the cameraVideo Out setting NTSCor PAL(seepage 33).
Makesurethe externaldevicesettingsare correct.(Seethe device's
user'sguide.)
LCD screen messages
If..i Try one or more of the following
Nopictures or _ Changeimage storagelocation setting (seepage 32).
videosto display
48 (_ www.kodak.com/go/support