Table of Contents
Advertisement
65EB
IR Transmission delay This item allows you to select IR Transmission delay.
The choice : Enabled, Disabled.
Onboard Parallel Port This item allows you to determine onboard parallel
port controller I/O address setting.
The choice: 378H/IRQ7, 278H/IRQ5, 3BC/IRQ7,
Disabled.
Parallel Port Mode Select an operating mode for the onboard parallel
(printer) port. Select Normal, Compatible, or SPP
unless you are certain your hardware and software
both support one of the other available modes.
The choice: SPP, EPP, ECP, ECP + EPP.
ECP Mode Use DMA Select a DMA channel for the parallel port for use
during ECP mode.
The choice: 3, 1.
EPP Mode Select Select EPP port type 1.7 or 1.9.
3. Press <ESC> to return to the Main Menu when you finish setting up all
items.
49
Advertisement
Table of Contents
