SOLTEK SL-65EB User Manual page 48

65EB
Power ON Function This option allows you to select <KB Power ON
KB Power ON Pass-
Hot-Key Power ON Boot up the system via predetermined keyboard hot
KBC input clock The system designer must select the correct fre-
Onboard FDC
Controller
Onboard Serial
Port 1 / Port2
UART Mode Select This item allows you to select UART mode.
UR2 Duplex Mode This item allows you to select the IR half/full duplex
RxD, TxD Active Consult your IR peripheral documentation to select
48
Password> , <Hot-Key Power ON> or others.
The choice : Any Key, Button only, Keyboard 98,
Password, Hot-Key, Mouse Move, Mouse Click.
When user sets a password for keyboard, the pass-
word word user set that return the system to Full On state.
key.
The choice:<Ctrl>+<F1>...<F12>
quency for the keyboard controller input clock. Do not
change this value from the default value.
Select Enabled if your system has a floppy drive con-
troller (FDC) installed on the system board and you
want to use it. If you install add-in FDC or the system
has no floppy drive, select Disabled in this field.
The choice: Enabled, Disabled.
Select an address and corresponding interrupt for the
first and second serial ports.
The choice:3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/
The choice:Normal,IrDA,ASKIR,SCR.
function.
The choice : Full, Half.
the correct setting of the TxD and RxD signals.
The choice : Hi, Hi/Hi, Lo/Lo, Hi/Lo, Lo.
IRQ3, Disabled, Auto.