SOLTEK SL-65EB User Manual page 42

65EB
2. Use one of the arrow keys to move between options and modify the se-
lected options by using PgUp / PgDn / + / - keys. An explanation of the
<F> keys follows:
<F1>: "Help" gives options available for each item.
<Shift> + <F2>: Change color.
<F5>: Get the previous values. These values are the values with which the
user started in the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
Auto Configuration Auto Configuration selects predetermined optimal
EDO DRAM Speed
Selection
EDO CASx# MA Wait
42
values of chipset parameters. When Disabled, chipset
parameters revert to setup information stored in
CMOS. Many fields in this screen are not available
when Auto Configuration is Enabled.
The value in this field must correspond to the speed
of the DRAM installed in your system. DO NOT
change the default setting of this field, as determined
by the system board manufacturer for the installed
DRAM, This value is access speed, so a lower value
means a faster system. This field applies only if EDO
DRAM is installed in the system.
The board designer may elect to insert one additional
State wait state before the assertion of the first CASx# for
page het cycles, thus allowing one additional clock of
MA setup time to the CASx# for the leadoff page hit
cycle. Do not change from the manufacturer's default
unless you are getting memory addressing errors.
Thel field applies only if EDO DRAM is installed in
the system.