Table of Contents
Advertisement
3.4
DKHiQV-AGP Multimedia Interfaces
3.4.1
NTSC/PAL Composite Video Output (TV Out)
The HiQVideo™ controllers provide video encoder support and a composite sync signal which some encod-
ers require. DK boards incorporate an NTSC/PAL encoder from Analog Device (AD722 or AD723) to con-
vert the VGA signals to the composite NTSC video and S-VHS video signals. The board provides a
composite NTSC video connector J3 and a S-VHS video connector J1. Pin W6 switches between NTSC
and PAL modes. Composite Video Output is also referred to as TV Out. It can be either NTSC or PAL for-
mat.
Refer to Table 7 for TV-Out jumper settings.
&+,36
®
DKHiQV-AGP (Fab. Rev. A) Subject to Change Without Notice
DKHiQV-AGP (Fab. Rev. A) User's Guide
8
Revision 1.0 7/13/98
Advertisement
Table of Contents
