Remove all power supplies
7.
Loosen the thumbscrews and extend the chassis from the rack.
8.
Remove the chassis from the rack (on page 30)
9.
Remove the access panel
10.
Disconnect the cable from the fan cage.
11.
Remove the fan module.
12.
To replace the component, reverse the removal procedure.
HP Smart Storage Battery
WARNING:
internal system components to cool before touching them.
("Remove the power
("Remove the chassis access
To reduce the risk of personal injury from hot surfaces, allow the drives and the
supply" on page 28).
panel" on page 32).
Removal and replacement procedures 56