Hp Smart Storage Battery - HP ProLiant DL60 Gen9 Maintenance And Service Manual

Remove the hot-plug drive backplane.
7.
To replace the component, reverse the removal procedure.

HP Smart Storage Battery

For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
CAUTION:
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the external drives as failed when the server is powered up.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 27).
o
Remove the access panel
4.
Disconnect the Smart Storage Battery cable from the system board.
5.
In systems that use external data storage, be sure that the server is the first unit to be
("Access panel" on page 33).
Removal and replacement procedures 36