Node Rear Panel Leds And Buttons - HP Apollo 2000 Maintenance And Service Manual

Node rear panel LEDs and buttons

•
1U node
Item
1
2
3
4
5
Description
Power button/LED*
UID button/LED*
Health LED*
Do not remove LED
iLO activity LED
Status
Solid green = System on
Flashing green (1 Hz/cycle per sec) =
Performing power on sequence
Solid amber = System in standby
Off = No power present**
Solid blue = Activated
Flashing blue:
•
1 Hz/cycle per sec = Remote management
or firmware upgrade in progress
•
4 Hz/cycle per sec = iLO manual soft
reboot sequence initiated
•
8 Hz/cycle per sec = iLO manual hard
reboot sequence in progress
Off = Deactivated
Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is
rebooting
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System
critical†
Flashing white (1 Hz/cycle per sec) = Do not
remove the node. Removing the node may
terminate the current operation and cause data
loss.
Off = The node can be removed.
Green or flashing green = Network activity
Off = No network activity
Component identification 101