Low-Profile Lff Hot-Plug Drive Led Definitions - HP Apollo 2000 Maintenance And Service Manual

Low-profile LFF hot-plug drive LED definitions

Item
1
2
Online/activity
LED (green)
On, off, or
flashing
On, off, or
flashing
On
On
Flashing (1 Hz)
Flashing (1 Hz)
Flashing (4 Hz)
Flashing (4 Hz)
Off
Off
Off
Definition
Fault/UID (amber/blue)
Online/Activity (green)
Fault/UID LED Definition
(amber/blue)
Alternating amber The drive has failed, or a predictive failure alert has been received for
and blue this drive; it also has been selected by a management application.
Steadily blue The drive is operating normally, and it has been selected by a
management application.
Amber, A predictive failure alert has been received for this drive. Replace the
Flashing (1 Hz) drive as soon as possible.
Off The drive is online, but it is not active currently.
Amber, Do not remove the drive. Removing a drive may terminate the current
Flashing (1 Hz) operation and cause data loss.
The drive is part of an array that is undergoing capacity expansion or
stripe migration, but a predictive failure alert has been received for this
drive. To minimize the risk of data loss, do not replace the drive until
the expansion or migration is complete.
Off Do not remove the drive. Removing a drive may terminate the current
operation and cause data loss.
The drive is rebuilding, erasing, or it is part of an array that is
undergoing capacity expansion or stripe migration.
Amber, The drive is active, but a predictive failure alert has been received for
Flashing (1 Hz) this drive. Replace the drive as soon as possible.
Off The drive is active, and it is operating normally.
Steadily amber A critical fault condition has been identified for this drive, and the
controller has placed it offline. Replace the drive as soon as possible.
Amber, A predictive failure alert has been received for this drive. Replace the
Flashing (1 Hz) drive as soon as possible.
Off The drive is offline, a spare, or not configured as part of an array.
Component identification 111