Xilinx Alveo U200 Getting Started page 32

Under Partitions running on FPGA it displays the base partition running on the FPGA
xilinx_u250_gen3x16_base_3. A shell partition will also be displayed if it has already
been programmed.
Under Partitions installed in system it displays available shell partition(s)
available to program on the FPGA. In this example, only one shell partition is available
xilinx_u250_gen3x16_xdma_shell_3_1.
The logic-uuid and interface-uuid are used by the system to ensure compatible base
and shell partitions are used for a given application.
If no shell partitions are displayed under Partitions installed in system, it implies
no shell partitions compatible with the base partition have been installed. Download and
install a compatible shell partition.
2. Enter the following command to program the shell partition on the FPGA.
$ sudo /opt/xilinx/xrt/bin/xbmgmt partition --program --name
<shell_name> --card <card_bdf>
where <shell_name> is the name of the shell partition to be programmed to the card
identified with BDF <card_bdf>.
In the previous example xilinx_u250_gen3x16_xdma_shell_3_1 will be programmed
to card with BDF 00:65:00.0. See
obtain the card_bdf and shell_name option.
An output similar to the following example will be displayed:
Programming PLP on Card [0000:65:00.0]...
Partition file: /opt/xilinx/firmware/u250/gen3x16/xdma-shell/
partition.xsabin
Program successfully
3. Enter the following command and confirm the shell partition displayed under Partitions
installed in the system and Partitions running on FPGA match.
$ sudo /opt/xilinx/xrt/bin/xbmgmt partition --scan
An output similar to the following example will be displayed.
Card [0000:65:00.0]
Partitions running on FPGA:
xilinx_u250_gen3x16_base_3
xilinx_u250_gen3x16_xdma_shell_3_1
Partitions installed in system:
UG1301 (v1.8) February 5, 2021
Getting Started with Alveo Accelerator Cards
Appendix D: Obtaining xbmgmt Command Options
logic-uuid:
48810c9d17860ef53e9e529e8b14ce39
interface-uuid:
695718ec21a232e45e1afcb4e558e11f
logic-uuid:
bd5fb8abab266c3265918257b5048e88
interface-uuid:
f2f6c5e1273e78948f2c4806221462f2
Chapter 5: Card Bring-Up and Validation
www.xilinx.com
Send Feedback
to
32