Xilinx Alveo U200 Getting Started page 3

Appendix C: Reverting the Card to Factory Image
Appendix D: Obtaining xbmgmt Command Options
Card Features
XRT and Deployment Package Installation Procedures on
Ubuntu
xbutil validate
Appendix E: Regulatory and Compliance Information
Chapter 1: Introduction
Card Features
xbutil validate
XRT and Deployment Package Installation Procedures on
Ubuntu
Chapter 7: Troubleshooting
Known Issues
General
Qualified Servers
Chapter 4: Installing the Deployment Software
Known Issues
XRT and Deployment Platform Installation Procedures on
RedHat and CentOS
XRT and Deployment Package Installation Procedures on
Ubuntu
Running xbmgmt flash --scan
Appendix A: Changing XRT and Target Platform Versions
Appendix C: Reverting the Card to Factory Image
Upgrade from 2018.x to 2019.1 in RedHat and CentOS
Upgrade from 2018.2 to 2018.3 in RedHat and CentOS
Upgrade from 2018.2 to 2018.3 in Ubuntu
Downgrade from 2018.3 to 2018.2 in Ubuntu
Upgrade from 2018.x to 2019.1 in Ubuntu
Downgrade from 2018.3 to 2018.2 in RedHat and CentOS
Chapter 1: Introduction
UG1301 (v1.8) February 5, 2021
Getting Started with Alveo Accelerator Cards
Section
08/18/2020 Version 1.6
06/03/2020 Version 1.5
12/18/2019 Version 1.4
10/31/2019 Version 2019.2
07/23/2019 Version 2019.1
Revision Summary
Clarified description.
Added appendix.
Updated information.
Added a link to Xilinx Answer Record 75294.
Added a note about installing XRT on Ubuntu.
Added appendix.
Updated the information.
Added new section.
Updated information about specifying -d.
Added a note about XRT installation.
Updated information about installing packages on RedHat
and CentOS.
Added a known issue.
Updated to the Vitis™ unified software platform throughout.
Updated outputs throughout document.
Provided the web link to the qualified servers.
Replaced xbutil command with the new xbmgmt
command for card flashing. Updated output logs.
Added a known issue.
Replaced xbutil command with the new xbmgmt
command for card flashing. Updated output logs.
Replaced xbutil command with the new xbmgmt
command when scanning card. Updated output logs.
Replaced xbutil command with the new xbmgmt
command for card flashing. Updated output logs.
Added new appendix.
Corrected answer record links
Send Feedback
Revision History
www.xilinx.com
3