Dcfm (All 8648A/B/C/D) - Agilent Technologies 8648A Operation And Service Manual

Adjustments
Manual Adjustments

DCFM (All 8648A/B/C/D)

Description
This adjustment is used to calibrate the DC FM. Make sure that nothing is connected to
the MOD INPUT/OUTPUT connector on the DUT.
Required Test Equipment
• None
Procedure
Figure 7-24. DCFM Test Setup
1. Connect the equipment as shown above.
2. Preset all of the equipment.
3. Follow the instructions as they are displayed on the PC.
7-26