To Force All Channels On Or All Channels Off; To Change The Display Size Of The Digital Channels - Agilent Technologies 54622A User Manual

To force all channels on or all channels off

1 Press the D15 Thru D8
2 Press the (or
Turn on
Each time you press this softkey, the softkey toggles between Turn on and Turn
off. When pressed, this softkey forces all digital channels in the selected pod to
be turned on or to be turned off.
To turn one or more of the individual channels back off or on, turn the Entry
knob to select the desired channel, then press the channel on/off softkey to
turn the channel on or off.
Turn on/Turn off softkey and D15 Thru D8/D7 Thru D0 key differences
The Turn on/Turn off softkey toggles the on/off state of the channels. The
D15 Thru D8/D7 Thru D0 front-panel key toggles the display state of the channels.
Toggling the display state means you can setup what channels you want to see, then
quickly hide or display the channels by pressing the D15 Thru D8/D7 Thru D0 key.

To change the display size of the digital channels

1 Press the D15 Thru D8
2 Press the size (
displayed.
The sizing control allows you to spread out or compress the digital traces
vertically on the display for more convenient viewing. Setting the size in either
digital channel menu determines the size for all displayed digital channels.
Select to display 8 channels or
Select to display 16 channels in half of the display.
MegaZoom Concepts and Oscilloscope Operation
To force all channels on or all channels off
key or D7 Thru D0 key.
) softkey.
Turn off
key or D7 Thru D0 key.
) softkey to select how the digital channels are
to display 16 channels full screen.
4- 35