Agilent Technologies 8648A Operation And Service Manual page 306

Adjustments
Agilent Service Support Software
3. Select Test Drivers from the File drop-down menu.
4. Select the driver (.dll) file to be removed (31).
5. Ensure that the information displayed in the Version, Device Type, and Models
Supported fields reflects the current information for the selected driver.
6. Click Remove (32).
7. Click Close (33).
Adding Datapacks
The addition of datapacks is accomplished using the Datapacks dialog box. The Datapacks
window allows for the addition of datapacks for the test procedures being used to verify the
performance of the DUT. Follow these instructions to add a datapack:
1. Log in.
2. Cancel the Select Test Equipment and Tests window.
7-50