Cs System Reporting Options; Cs Area & System Reporting Options - NAPCO GEMINI GEM-P1632 Programming Instructions Manual

Page 32
CS SYS TEM RE P ORTIN G OPT ION S (ADDRES S 0670-0705)
ADDRESS 0670-0682
CS SYSTEM
REPORTING CODES
Alarm Restore blank (•)
Trouble
blank (•)
Trouble Restore
blank (•)
Xmitter Low Battery
blank (•)
Xmitter Supervision
blank (•)
Xmitter Tamper
blank (•)
RESERVED
blank (•)
Opening
blank (•)
Closing
blank (•)
Opening after Alarm
blank (•)
Conditional Close
blank (•)
Cancel
blank (•)
Test Timer
[Default = blank (•) blank (•) from address 0670-0682]
[Default = blank (•) blank (•) from address 0683-0705]
CS AREA & SYS TEM RE POR TIN G OP TION S (ADD RESS 078 5, 0 7 86 & 0 788 )
DISABLE OPENING REPORTS
ADDRESS 0785
LEFT DIGIT RIGHT DIGIT (SUM
OF DATA VALUES)
blank (•)
[Default = blank (•) blank (•)]
CS SYSTEM REPORT OPTIONS
Cancel Next Test Timer on any Report
Disable Wait for Silence (Pager Format)
Disable Wait for Handshake on Transmit
Disable Auto Dial Tone Detect
CS AREA & SYSTEM REPORTING OPTIONS:
1. Select the desired option by circling
2. Add the data values (ex: F=15=(1+2+4+8) from the selected options. See page 23).
3. Enter in address location (left and right digits).
NOTE: Dark shaded data value box shows option not available. Press
X
GEM-P1632 Programming Instructions
CS SYSTEM
REPORTING CODES
ADDR
Telco Fail
0670
RF Rec. Trouble
0671
Memory Fail
0672
Low Battery
0673
Panel AC Fail
0674
EZM Tamper
0675
Alarm Output Superv.
0676 blank (•) Ambush
Panic
0677
Fire
0678
Auxiliary *
0679
Tamper
0680
Fail to Open
0681
Fail to Close
0682
Keyfob Low Battery
RIGHT DATA
VALUES
)
(CIRCLE
1
RESERVED
2
RESERVED
4
RESERVED
8
LEFT DATA
VALUES
)
(CIRCLE
LEFT DIGIT (SUM
1
2
4
8
the data values for each digit (left and right).
ADDRESS 0683-0708
ADDR
0683
0684
0685
0686
0687
0688
0689
0698
0699
0700
0701
0702
0703
0704
0705
DISABLE CLOSING REPORTS
AREA
ADDRESS 0786
AREA 1
LEFT DIGIT
blank (•)
[Default = blank (•) blank (•)]
ADDRESS 0788
RIGHT DIGIT (SUM
[Default = blank (•) blank (•)]
U
to save.
CS SYSTEM REPORTING CODES:
1. Enter in corresponding address location
(left and right digits).
NOTE: Left digit is the first digit and
right digit is the second digit in a two
digit CS receiver format.
2. Valid entries are: 1-9, 0 and B-F.
NOTE: A is not permitted.
bl
3. To disable a code leave boxes blank
(•).
NOTE: Dark shaded data value box
shows option not available.
U
4. Press to save.
* NOTE: Keypad Aux. is not to be se-
lected for UL Installations.
RIGHT DATA
(CIRCLE
RIGHT DIGIT (SUM
OF DATA VALUES)
RIGHT DATA
VALUES CS SYSTEM REPORT OPTIONS
)
(CIRCLE
1 Backup Report on Telco 1 & 2
2 Touch-tone Dialing Only *
4 Touch-tone Dialing w/Rotary Backup
8
* NOTE: If neither Touch-tone Dialing
nor Touch-tone w/Rotary Backup is
selected, then system defaults
automatically to Rotary Dialing. Leave
blank (•) to select Rotary Dialing.
L
NAPCO Security Systems
WI1148B 10/06
VALUES AREA
)
AREA 1
1
RESERVED
2
RESERVED
4
RESERVED
8
*
RESERVED