Regular Inspections - Bornack ONE FLEX User Manual

APPROVAL
Complies with the EC Directive 2016/425
for PPE.
EU type testing (Module B) and produc-
tion monitoring (Module C2) by:
TÜV SÜ D Produc t Ser vice GmbH
Ridlerstr. 65, D-80339 Munich CE 0123
Quality management system certified to
DIN EN ISO 9001:2015.
Production monitoring by notified office
in accordance with Category III.
Supplementary product inspections:
• ‚Horizontal use' and ‚load over edge'
(r = 0.5 mm) acc. to CNB/P/11.074.
• ONE FLEX Y also: CNB/P/11.063 (special
tape energy absorber with a Y-lanyard).
OTHER

REGULAR INSPECTIONS

• This personal protective equipment
must be inspected at least once a year
by an expert in compliance with DGUV
Principle 312-906. The result must be
documented in the test card at the end
of this User Manual.
• If the tapes of the tape energ y
absorber have been removed from the
bag, ensure when they are returned
that they are stowed correctly (see
page 5) to prevent malfunctions.
SALES
• The dealer must ensure that the User
Manual is supplied in the language of
the designated country. The respective
translation must be authorised by
BORNACK.
EN