Subscribe to Our Youtube Channel
Related Manuals for Bornack BFD ROPE03
Summary of Contents for Bornack BFD ROPE03
- Page 1 BFD ROPE03 User Manual 0511 EN 354:2010, EN 355:2002, CNB/P/11.074, BFD ROPE Y03 also CNB/P/11.063...
-
Page 2: Brief Description
The tape energy absorber with the between persons and the attachment lanyard BFD ROPE03 and BFD ROPE03 is point does not exceed 2.0 m (including part of personal protective equipment the energy absorber, lanyard and (PPE) of category III to prevent falls from connecting elements). - Page 3 BRIEF DESCRIPTION EQUIPMENT • Tape energy absorber according to EN 355 made of polyester and poly- amide • Black steel ring • Safety rope made of polyamide • Connectors according to EN 362 or CSA Z259.12 made of aluminium or steel •...
- Page 4 4 | 5 BFD ROPE03 Connector according to EN 362 or CSA Z259.12 Safety rope Black steel ring Connector according Bag of the tape to EN 362 or energy absorber CSA Z259.12 BFD ROPE Y03 Connector according to EN 362 or CSA Z259.12...
- Page 5 IDENTIFICATION IN THE BAG Identification TAPE COURSE INSIDE THE BAG Red tape Zig-zag course White tape...
-
Page 6: Information Before Use
Seams are undam- • Faulty PPE components may only be aged. tested or repaired by BORNACK or in a • Black steel ring undamaged. workshop authorised in writing by • Connecting elements without damage. -
Page 7: Body Harness
BFD ROPE03 IN USE ATTACHMENT TO THE FULL BODY HARNESS Observe the User Manual of the full body harness acc. to EN 361. A Hook the connector of the energy absorber into the front or rear D-ring of the full body harness marked with Observe the User Manual of the connector. - Page 8 (e.g. PROTEC S). CAUTION: RISK TO LIFE! BFD ROPE03 and BFD ROPE Y03 may not be used in a noose or cow hitch! Instead, create an attachment point with a tape sling (e.g. PROTEC S)! Read the User Manual of the connectors.
- Page 9 BFD ROPE03 IN USE APPLICATION F Only use energy absorber so that it can assume the fall absorbing func- tion in case of a fall. G If the safety rope is wrapped around a part for anchoring, the connector of the safety rope may only be hooked into the black steel ring.
- Page 10 Never hook the free strand into the full body harness. I Two separate BFD ROPE03 tape energy absorbers with lanyards may not be used in parallel. J Avoid slack rope. Slack rope extends the fall path.
- Page 11 BFD ROPE03 IN USE L Ensure adequate space below the edge. CAUTION: RISK TO LIFE! The excess lanyard is the difference between the lanyard length (incl. energy absorber end connections and connectors) and the distance between the anchor point and fall edge...
- Page 12 = 0.5 mm was used. Based on this test, • Use a retention system to rule out a BFD ROPE03 and BFD ROPE Y03 are suit- fall. able for use on similar edges, for • Attach a suitable edge protection.
- Page 13 D according to EN 795 should be used. CAUTION: RISK TO LIFE! If BFD ROPE03 and BFD ROPE Y03 are ATTENTION: used with an attachment device in When falling over an edge there is a risk...
- Page 14 14 | 15 BFD ROPE03 IN USE COMBINATION When combining this product with other parts, there is a risk of mutual impairment with respect to the function and safety. Compatibility must be assessed during the risk analysis. Only combine with personal protective equip- ment that bears a CE symbol.
- Page 15 • If this PPE is used as an arrester system (German Social Accident Insurance) (free fall is possible), only full body principle 312-906, by BORNACK or by a harnesses that comply with EN 361 workshop authorised in writing by may be used.
-
Page 16: Safety Regulations
Casualties must be rescued within 20 minutes. BORNACK can help you draw up tailor- made rescue concepts and includes these in the necessary training courses. -
Page 17: Regular Inspections
The respective • 'Horizontal use' and 'load over edge' translation must be authorised by (r = 0.5 mm) acc. to CNB/P/11.074. BORNACK. • BFD ROPE Y03 also: CNB/P/11.063 (special test for tape energy absorber with a Y-lanyard). -
Page 18: Maintenance
OTHER SERVICE CLEANING If you have any further questions about • Dry damp personal protective equip- this PPE or other BORNACK services, ment in the air, not on artificial heat such as: sources. Dry metal components with cloths. • Risk analyses •... - Page 19 OTHER LIFE SPAN If the BFD ROPE03 and BFD ROPE Y03 are wrapped around parts for anchoring, The following recommendation applies more wear can be expected. for the use of the BFD ROPE03 and BFD ROPE Y03: The company owner must ensure...
- Page 20 REPAIRS STORAGE • For reasons of liability, repairs may • Dry wet PPE before storage. only be carried out by BORNACK or in a • Store in a dry place away from direct workshop authorised in writing by sunlight. BORNACK.
-
Page 21: Product Identification
OTHER PRODUCT IDENTIFICATION The following identification is on the product: Identification BFD ROPE03: Can be used horizontally Use over edge CE symbol and possible, see page 12 number of the test office Do not load over Product category Length sharp edges... - Page 22 22 | 23 OTHER Identification BFD ROPE Y03: Can be used horizontally Use over edge CE symbol and possible, see page 12 number of the test office Do not load over Product category Length sharp edges User Product name Product type weight Logo Serial number...
- Page 23 EU DECLARATION OF CONFORMITY...
-
Page 24: Eu Declaration Of Conformity
24 | 25 EU DECLARATION OF CONFORMITY... - Page 25 TEST CARD FOR ANNUAL MONITORING The test list must be Type: _________________________________ completed in full by the expert during the annual Production date: _________________________ inspection. Charge: Serial no.: ________________ _______ This test list does not claim to cover all test Purchase date: __________________________ criteria and does not...
- Page 26 26 | 27 TEST CARD FOR ANNUAL MONITORING Please complete: Year 1st 2nd 3rd 4th 5th 6th 7th 8th Tape energy absorber with a lanyard complete? Safety rope(s) undamaged? Rope end connections undamaged? Connectors and their fastener locks undamaged? Black steel ring undamaged? Bag of the tape energy absorber...
- Page 27 TEST CARD FOR ANNUAL MONITORING Please complete: Year 1st 2nd 3rd 4th 5th 6th 7th 8th No foreign bodies in the tape energy absorber bag? Are the tapes (see page 5 below) stowed in a bag in a zigzag form and are they undamaged? Seam patterns of the tape energy absorber...
- Page 28 Tel + 49 (0) 70 62 / 26 90 0-0 Fax + 49 (0) 70 62 / 26 90 0-550 info@bornack.de www.bornack.de © BORNACK – Subject to technical changes Reprinting or duplication, even of excerpts, is only permitted with written consent Status: 05/2021 GAL Art.-No. 8000189_EN anh...
Need help?
Do you have a question about the BFD ROPE03 and is the answer not in the manual?
Questions and answers