Related Manuals for Bornack ONE FLEX
Summary of Contents for Bornack ONE FLEX
- Page 1 ONE FLEX User Manual 0123 EN 354:2010, EN 355:2002, CNB/P/11.074, ONE FLEX Y also CNB/P/11.063...
-
Page 2: Brief Description
The tape energy absorber with the between persons and the attachment lanyard ONE FLEX and ONE FLEX Y is part point does not exceed 2.0 m (including of personal protective equipment (PPE) the energy absorber, lanyard and of category III to prevent falls from connecting elements). - Page 3 BRIEF DESCRIPTION FUNCTION After a fall, the energy tape absorber regulates the intensity of the fall impact and absorbs this to maximum 6 kN. EQUIPMENT • Tape energy absorber according to E N 3 5 5 m a d e o f p o l ye s t e r a n d polyamide •...
- Page 4 4 | 5 ONE FLEX Connecting element acc. to EN 362 Lanyard Black aluminium ring Connecting element acc. to EN 362 ONE FLEX Y Lanyard Lanyard Connecting element acc. to EN 362 Connecting element acc. to EN 362 Black aluminium ring Connecting element acc.
- Page 5 IDENTIFICATION IN THE BAG Identification TAPE COURSE INSIDE THE BAG Black tape White Zig-zag course tape Yellow tape...
-
Page 6: Information Before Use
• Faulty PPE components may only be • Black aluminium ring undamaged. tested or repaired by BORNACK or in a • Co n n e c t i n g e l e m e n t s w i t h o u t workshop authorised in writing by damage. -
Page 7: Body Harness
ONE FLEX IN USE ATTACHMENT TO THE FULL BODY HARNESS Use the full body harness acc. to EN 361 and observe the User Manual of the full body harness. A Open the connecting element of the energy absorber. Observe the User Manual of the connecting element. - Page 8 (e.g. PROTEC S). CAUTION THREAT TO LIFE: ONE FLEX and ONE FLEX Y may not be used in a noose or cow hitch! Instead, create an attachment point with a tape sling (e.g. PROTEC S)! Observe the User Manual of the connecting elements.
- Page 9 ONE FLEX IN USE APPLICATION G Only use the energy absorber in a way that allows it to assume the fall- absorbing function in case of a fall. H If the lanyard is wrapped around a part for anchoring, the connecting element of the lanyard may only be hooked into the black aluminium ring.
- Page 10 10 | 11 ONE FLEX IN USE I When using the ONE FLEX, always ensure that both strands are hooked to the attachment point. Never hook the free strand into the full body harness. J Two separate ONE FLEX tape energy absorbers with a lanyard may not be fitted in parallel.
- Page 11 ONE FLEX IN USE M E n s u re t h at t h e re i s a d e q u at e clearance below the edge. Length CAUTION THREAT TO LIFE: The lanyard excess is the difference...
- Page 12 Also check the following in the risk assessment: The tape energy absorber with a lanyard • Is the radius of the fall edge greater ONE FLEX and ONE FLEX have also been than 0.5 mm? tested successfully according to • Is the edge burr-free? CNB/P/11.074 for horizontal use and a...
- Page 13 D according to EN 795 should be used. CAUTION THREAT TO LIFE: If ONE FLEX and ONE FLEX Y are used with an attachment device in compli- ance with EN 795-C, the movement of the attachment deuce needs to also be taken into account when calculating the required free space below the edge.
- Page 14 14 | 15 ONE FLEX IN USE CAUTION: When falling over an edge there is a risk of injury during the fall by banging into the building or parts of the construction. CAUTION: In the event of a fall over an edge, special measures need to be defined and practiced.
- Page 15 DGUV BORNACK and may not impair the principle 312-906, by BORNACK or by a function and safety of the protective workshop authorised in writing by equipment.
-
Page 16: Safety Instructions
• Before starting work, the responsible person must draw up a plan of rescue measures that defines how to rescue casualties quickly and safely and ensures first aid measures. Casualties must be rescued within 20 minutes. BORNACK can help you draw up tailor-... -
Page 17: Regular Inspections
Manual is supplied in the language of • ‚Horizontal use‘ and ‚load over edge‘ the designated country. The respective (r = 0.5 mm) acc. to CNB/P/11.074. translation must be authorised by • ONE FLEX Y also: CNB/P/11.063 (special BORNACK. tape energy absorber with a Y-lanyard). -
Page 18: Maintenance
If you have any further questions about • D r y d a m p p e r s o n a l p r o t e c t i ve this PPE or other BORNACK services, equipment in the air, not on artificial such as: heat sources. - Page 19 T h e fo l l o w i n g r e c o m m e n d a t i o n compliance with the maximum usage applies for the use of the ONE FLEX und period by documenting first-time use in ONE FLEX Y: the test card.
- Page 20 20 | 21 OTHER STORAGE • Dry damp PPE before storage. • Store in a dry place away from direct sunlight. • Do not store PPE near radiators. Permanent exposure to temperatures below 0 °C or above +50 °C have a negative impact on the strength of the textile material and shorten the life span.
-
Page 21: Product Identification
OTHER PRODUCT IDENTIFICATION The following identification is on the product: Identification ONE FLEX: Horizontal use possible Can be used over edges,see page 12 CE symbol and number Do not load connec- Product type of the test office ting element over... - Page 22 22 | 23 OTHER Identification ONE FLEX Y: Horizontal use possible, CE Can be used over edges, see page 12 sign and number Do not load connec- Product type of the test office ting element over Length when expanded edges...
-
Page 23: Eu Declaration Of Conformity
EU DECLARATION OF CONFORMITY... -
Page 24: T E S T C A R D
24 | 25 T E S T C A R D FOR ANNUAL MONITORING The test list must be Type ONE: ______________________________ completed in full by the expert during the annual Production date: _________________________ inspection. Charge: Serial no.: ________________ _______ This test list does not claim to cover all test Purchase date:... - Page 25 T E S T C A R D FOR ANNUAL MONITORING Please complete: Year Tape energy absorber with a lanyard complete? Lanyard undamaged? End connections undamaged? Connecting elements and their fastener locks undamaged? Black aluminium ring undamaged? Bag of the tape energy absorber undamaged? Zip undamaged?
- Page 26 26 | 27 T E S T C A R D FOR ANNUAL MONITORING Please complete: Year Tape energy absorber not ripped? Are the tapes of the tape energy absorber zigzagged (see page 5) stowed in a bag and with no signs of damage? Seam patterns of the tape energy absorber...
- Page 27 Notes:...
- Page 28 Untere Brühlstr. 11 4800 Zofingen, AG Switzerland Tel + 41 (0) 62 / 886 30 40 info@bornack.ch www.bornack.ch © BORNACK – Subject to technical changes Reprinting, even of excerpts, is only permitted with written consent Status: 02/2019 GAL Nr. 000 175 anh...