ATTACHMENT TO THE FULL
BODY HARNESS
Use the full body harness acc. to
EN 361 and observe the User
Manual of the full body harness.
A Open the connecting element of the
energy absorber. Observe the User
Manual of the connecting element.
Push up and turn the fastener of the
TWISTLOCK PLUS karabiner, then open
the snapper.
B Hook the connecting element of the
energy absorber into the D-ring at the
front or rear of the full body harness
marked A.
C The energy absorber always needs to
be attached to the full body harness
and not to the attachment point.
Otherwise, the energy absorbing
function of the energy absorber could
be compromised
ONE FLEX IN USE
A
B
C
EN