BRIEF DESCRIPTION INTENDED USE All other uses are deemed improper. The com- pany BORNACK will not be liable for any ensu- The FS3 DELTA arresting and rescue harness is ing damages. The user bears the sole risk. part of personal protective equipment (PPE) of category III to prevent falls from heights.
Page 3
BRIEF DESCRIPTION ACCESSORIES • for the FS301/CK: suitable connector to con‑ nect the arresting loops, e.g HEART LIGHT karabiner...
Page 4
4 | 5 FS301/CKP Rubber rings Shoulder strap Rear D‑ring EASY GLIDE buckle CLICK PRO fastener with Chest strap an integrated front D‑ring Seam pattern D‑ring on the side CLICK fastener Padded leg loops...
Page 5
FS301/CK Rubber rings Shoulder strap Rear D‑ring Buckle Chest strap Arresting loops Seam pattern D‑ring on the side CLICK fastener Padded leg loops...
• Are there any obvious signs of damage to the repaired in a workshop authorised by fittings, D‑rings, buckles, karabiners? BORNACK. • The last inspection by an expert was carried • Regular inspections are essential because the out within the past 12 months.
Page 7
HARNESS FASTENERS IN USE ATTENTION: The D‑rings on the side only serve holding, and may only be used with the certified restraint lanyard shortener system. EN 358. EASY GLIDE BUCKLE A This buckle is only for adjusting the length of the harness strap.
Page 8
8 | 9 FS3 IN USE PREPARATION D Lift the harness of the rear arresting D‑ring. All CLICK fasteners must be open. Straps must hang freely and may not be twisted E Put on the arrester harness like a jacket: Arms through the shoulder straps.
Page 9
FS3 IN USE I Set the harness in the following sequence. 1st Regulate the length of the chest strap 2nd Regulate the length of the shoulder straps 3rd Regulate the length of the leg loops Tighten the strap so that you can place one flat hand between the strap and e.g.
Page 10
CE symbol. If you have any ques‑ tions about compatibility or you require help with the risk analyses, feel free to contact BORNACK. REMOVAL L To remove the full body harness, release the EASY GLIDE buckles/adjustment buckles and open the CLICK fasteners.
SERVICE Complies with the Regulation (EU) 2016/425 for If you have any further questions about this PPE PPE. or other BORNACK services, such as: EU type testing (Module B) and production • Risk analyses monitoring (Module C2) by: • Rescue plans •...
Page 13
For more details, please visit www.bornack.de. • If necessary, use compressed air to blow on the unit.
Page 14
14 | 15 OTHER STORAGE • Dry wet PPE before storage. • Store in a dry place away from direct sunlight. • Do not store PPE near radiators. Permanent exposure to temperatures above +50 °C has a negative impact on the strength of the textile material and shortens the life span.
OTHER PRODUCT IDENTIFICATION The following identification is on the product: CE symbol and number Product category of the test office Data matrix Max. Size Logo Product name useful load Product type Serial number Charge EN norms Observe/ read the Item number Production Manufacturer User Manual...
Page 16
16 | 17 TEST CARD FOR ANNUAL MONITORING The test list must be com‑ Type product name: ______________________________ pleted in full by the expert during the annual inspec‑ Production date: _______________________________ tion. Charge No.: Serial No.: ___________ _______________ This test list does not claim to cover all test criteria and Purchase date: _________________________________...
Page 17
TEST CARD FOR ANNUAL MONITORING Please complete: Year Year Year Year Year Year Year Year Year Year Strap undamaged? No chemical soiling? Seam patterns undamaged? Strap ends secured? Fittings in place and undamaged? No deformation of metal parts? EASY‑GLIDE buckle in place and smooth running? CLICK fasteners not deformed/ soiled/functional?
Need help?
Do you have a question about the DELTA FS3 and is the answer not in the manual?
Questions and answers