Bornack ONE FLEX User Manual page 19

LIFE SPAN
T h e fo l l o w i n g r e c o m m e n d a t i o n
applies for the use of the ONE FLEX und
ONE FLEX Y:
Maximum usage period after being
used for the first time: 8 years
In ideal storage conditions and annual
inspections, the product may be stored
for up to 3 years before it is used for the
first time without impacting on the
stated maximum usage period. Every
further year in storage reduces the final
maximum allowed usage period by 1 year.
Metal parts are not subject to age-
related life span deadlines. The expert
makes a decision about these parts
based on his technical expertise.
For reasons of safety, intensive use and/
or extreme application conditions such
as sharp edges, chemical influences, UV
radiation etc. will reduce the usage
period. The company owner needs to
take this into account in the workplace
risk analysis.
If ONE FLEX and ONE FLEX Y are wrapped
around parts of the building for attach-
ment, a higher level of wear can be
expected.
OTHER
The company owner must ensure
compliance with the maximum usage
period by documenting first-time use in
the test card.
The test card at the end of this user
manual must be presented during the
regular expert inspections and be
completed by an expert.
For more details, please visit is available
online at www.bornack.de
REPAIRS
• For reasons of liability, repairs may
only be carried out by BORNACK or in a
workshop authorised in writing by
BORNACK.
• Only original spare parts from the
manufacturer may be used.
EN