Table of Contents
Advertisement
A PPROVAL:
.
Complies with the Regulation (EU) 2016/425 for
PPE.
EU type testing (Module B) and production
monitoring (Module C2) by:
TÜV SÜD Product Service GmbH
Ridlerstr. 65, 80339 München
CE 0123
Quality management system certified to
ISO 9001:2015.
Production monitoring by notified office in
accordance with Category III.
REGULAR INSPECTIONS
• This personal protective equipment must be
inspected at least once a year by an expert in
compliance with DGUV Principle 312-906. The
result must be documented in the test card at
the end of this User Manual.
SALES
• The dealer must ensure that the User Manual
is supplied in the language of the designated
country. The respective translation must be
authorised by BORNACK.
OTHER
SERVICE
If you have any further questions about this PPE
or other BORNACK services, such as:
• Risk analyses
• Rescue plans
• Training courses
• Expert inspections
• Technical inspections
• Maintenance + inspections
If you have any questions, please contact our
e-mail hotline: info@bornack.de
We will be happy to help!
MAINTENANCE
• Apply a small amount of oil on the joints so
that the moving parts of the connector acc. to
EN 362 and other devices run smoothly. If pos-
sible, use precision mechanics oil. Ensure that
the oil does not come into contact with textile
PPE components.
• Maintenance may only be carried out by a
qualified expert in compliance with DGUV
Principle 312-906. All instructions in this User
Manual must be strictly observed.
• Protective equipment that is clean and well
looked after will last longer!
10 | 11
Advertisement
Table of Contents
