ATTACK SEK in black strains the user, especially in rescue operations. • D-rings on the side (only on ATTACK WORKER) Suitable securing elements and methods in lead climbing situations are e.g.: dynamic ropes...
Page 3
EASY GLIDE buckle Chest strap 2-part buckle fastener Padded hip strap D-ring on the side acc. to EN 358 (only for ATTACK WORKER) EASY GLIDE 4 material buckle loops Front belay loop EN 813 EASY GLIDE buckle Padded leg loops...
• Check that all seams are in a flawless condi- • Faulty PPE components may only be tested or tion. repaired by BORNACK or in a workshop au- thorised in writing by BORNACK. FUNCTION TEST • Regular inspections are essential because the safety of the user depends on the efficiency •...
Page 5
ATTACK IN USE PREPARATION ATTENTION: Put on the harness as described below and adjust to fit the wearer. A Lay out the harness so that the leg loops are not twisted and the EASY GLIDE buckles lie on the outside.
Page 6
6 | 7 ATTACK IN USE H Lay out the chest harness so that the braces and the horizontal chest strap are not twist- ed and the adjustment buckles and the front belay loops lie on the outside. I Put the chest harness on like a jacket.
Page 7
ATTACK IN USE CAUTION: RISK TO LIFE! Depending on the application, the suitable belay loop must be used! The lower loops of the connection loop are not arresting loops acc. to EN 361 and may not be used for arresting! ATTENTION: Avoid excess free suspension.
(situation-dependent) + braking path Accident Insurance) principle 312-906, by energy absorber (max. 1.75 m) + height of BORNACK or by a workshop authorised in D-ring (1.5 m) + safety reserve 1.0 m. writing by BORNACK. This must be document- •...
Page 9
SAFETY INSTRUCTIONS • The local safety guidelines (e.g. in Germany, the DGUV Regulations 112-198 and 112-199 issued by the professional associations) and the accident prevention guidelines for the specific industry (UVV) must be observed. • Application temperature: -20 °C to +80 °C. •...
SERVICE Complies with the Regulation (EU) 2016/425 for If you have any further questions about this PPE PPE. or other BORNACK services, such as: EU type testing (Module B) and production • Risk analyses monitoring (Module C2) by: • Rescue plans •...
Page 11
• If necessary, use compressed air to blow on REPAIRS the unit. • Repairs may only be carried out by BORNACK LIFE SPAN or in a workshop authorised in writing by BORNACK.
Page 12
12 | 13 OTHER STORAGE • Dry wet PSA before storage. • Store in a dry place away from direct sunlight. • Do not store PPE near radiators. Permanent exposure to temperatures below 0 °C or above +50 °C has a negative impact on the strength of the textile material and shortens the life span.
Page 13
OTHER PRODUCT IDENTIFICATION The following identification is on the product: Handling ATTACK WORKER chest strap buckles and Max. useful load Logo symbol connection Product name of the chest Product category harness Product type with the seat harness Charge Serial Data...
Page 14
14 | 15 OTHER Handling ATTACK SEK chest strap buckles and Max. useful load symbol Logo connection Product name of the chest Product category harness Product type with the seat harness Charge Serial Data number matrix Production Article Observe/ Size...
Page 16
16 | 17 TEST CARD FOR ANNUAL MONITORING The test list must be com- Type product name: ______________________________ pleted in full by the expert during the annual inspec- Production date: _______________________________ tion. Charge No.: Serial No.: ___________ _______________ This test list does not claim to cover all test criteria and Purchase date: _________________________________...
Page 17
TEST CARD FOR ANNUAL MONITORING Please complete: Year Year Year Year Year Year Year Year Year Year Strap undamaged? No chem. soiling? Seams undamaged? No deformation of metal parts? Fasteners undamaged and functional? Buckles undamaged and functional? No corrosion damage? Mech.