Table of Contents
Advertisement
N The attachment point must lie above
where the user is standing. It may not
lie below where the user is standing.
O The deflection at the edge must be at
least 90°.
P To prevent a swinging fall, work areas
or lateral movements from the central
axis to both sides need to be limited
to max. 1.5 m respectively. In other
cases, no individual attachment points
should be used, instead e.g. attach-
ment devices of the types C (only if
approved for joint use) or D according
to EN 795 should be used.
CAUTION THREAT TO LIFE:
If ONE FLEX and ONE FLEX Y are used
with an attachment device in compli-
ance with EN 795-C, the movement of
the attachment deuce needs to also be
taken into account when calculating the
required free space below the edge.
Observe the User Manual of the
anchor equipment.
ONE FLEX IN USE
N
P
O
EN
Advertisement
Table of Contents
