Maximum number of users: 1 person • Attachment All other uses are deemed improper. The company BORNACK will not be liable for any ensuing damages. The user bears the sole risk. FUNCTION The pipe hook FS90 has an automatic lock. This prevents unintentional removal of the pipe hook from the anchor point.
• The last inspection by an expert was carried minor faults. out within the past 12 months. • Faulty PPE components may only be tested or repaired by BORNACK or in a workshop FUNCTION TEST authorised in writing by BORNACK. • Regular inspections are essential because the •...
Page 5
B Attach the pipe hook to the anchor point. ATTENTION: The FS92 is approved as an anchor connector (EN 362, Class A) and should therefore only be used on the anchor point. C After the locking plate and snapper are...
Page 6
6 | 7 FS92 IN USE LOAD DIRECTIONS D Only use the pipe hook in a manner that ensures that it can be aligned optimally in the direction of the load. E Do not exert shearing loads onto the pipe hook.
Page 7
FS92 IN USE USE IN ARRESTING SYSTEMS H If the pipe hook is used in an arrester system, only full body harnesses that comply with EN 361 may be used. Observe the User Manual of the full body harness. ATTENTION:...
20 minutes. • Accessories from other manufacturers may BORNACK can help you draw up tailor-made only be used if approved by BORNACK and rescue plans and includes these in the neces- may not impair the function and safety of the sary training courses.
Page 9
SERVICE Complies with the EC Directive 2016/425 for If you have any further questions about this PPE PPE. or other BORNACK services, such as: Type testing and production monitoring by: • Risk analyses • Rescue concepts DEKRA Testing and Certification GmbH •...
Page 10
• Dry damp personal protective equipment in • For reasons of liability, repairs may only be the air, not on artificial heat sources. Dry carried out by BORNACK or in a workshop metal components with cloths. authorised in writing by BORNACK.
Page 11
OTHER PRODUCT IDENTIFICATION The following identification is on the product: Identification front side FS92: Logo Observe/read the User Manual EN norm Product name CE symbol/Number of the test office Product category Identification rear side FS92: Article no. Manufacturer address Website...
Page 13
20 | 21 TEST CARD FOR ANNUAL MONITORING T h e t e s t l i s t m u s t b e Type product name: ______________________________ completed in full by the expert during the annual Production date: ________________________________ inspection.
Page 14
14 | 15 TEST CARD FOR ANNUAL MONITORING Please complete: Year Year Year Year Year Year Year Year Year Year No mechanical damage? No deformation? No chemical soiling? No corrosion damage? Condition of the springs/ rivets/axes OK? Smooth snapper function? when the closing plate is closed, is it impossible to open the snapper?