Summary Of Components - Shift Lever And Shift Housing - Skoda Fabia II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
– Open clamp -arrow- and pull off gearshift knob together with
the collar.
Install
– Turn collar inside out.
Note
When inserting the gearshift knob on the selector lever the gear‐
shift knob must be pressed in up to the stop.
– Position the gearshift knob together with the collar and secure
it with a new open warm-type clamp -arrow- by pressing it to‐
gether.
– Fit the frame of the collar onto the pegs in the rear part of the
centre console.
– Press the frame onto the cover of the centre console until it
locks into the pegs in the front part.
1.7

Summary of components - Shift lever and shift housing

Note
Grease bearing and friction surfaces with grease - G 000 450 02- .
82
Rep. gr.34 - Controls, housing