Motor Fixing; Wire Connection - Richmond GTR500 User Manual

C

Motor Fixing

Assemble the rear bracket and fix it on the pillar.
Remove the wire cover and fix the rear bracket with the pin. Release the gate opener and place the
pin into the fitting position no.1 and no. 2
Make sure the gate openers are mounted in horizontal position especially in those positions.
1) When gate in CLOSE position
2) When gate in OPEN position
3) When gate at 45
Prior to weld the bracket on the gate leaf(if necessary), cover the gate opener to
prevent damages from sparks.
D

Wire Connection:

(1) Avoid tension in the cable during open and close phase.
(2) Always connect the grounding wire(GND)
PART A: Gate Motor and Associated Parts User Manual
o
angle position
Motor1+
Motor1-
5V
GND
Limit1
Limit2
no.1
Limit Switch
A
Blue
Black
Green
B
no.2
A
B
3