Display Options For Smartlabel Keys; Settings On The Phone; Display Mode Settings - Snom D120 User Manual

D120 User Manual
D
isplay options for SmartLabel keys
A number of settings control the appearance of the SmartLabels on the display; they can be set on the
phone and on the phone's web interface. There are separate settings for the idle screen, call screens,
and other screens. Settings options:
◦
Default display mode and Alternative display mode. The display will revert to the default
mode after the number of seconds set in Back to default display mode have elapsed.
The factory defaults are Short label for the Default display mode, and Full label for the
Alternative display mode. You can also select Half or turn either one or both of them off.
Short label
◦
Alternative display trigger. This setting defines whether or not the appearance of the Smart
Labels can be switched from the default to the alternative appearance by long-pressing
SmartLabel key P2. The default setting is Long press P2.
◦
Return/Reset to default mode timer after (sec.). This setting defines after how many
seconds the appearance of the SmartLabels will automatically return to the default. Valid
values are 0 to 360 seconds, the default is 3 seconds. Selecting 0 turns automatic reversion
off.
Manually returning the display mode to the default: Press
return to the default setting when another key is pressed, e.g., a number key to open the dial
screen, the directory key

Settings on the phone

Display mode settings

1. Press -> Preferences.
2. Select Display and press
3. Select SmartLabel options and press
other screens is done the same way.
4. Select Idle Screen Behavior, Call Screen Behavior, or Other Screen Behavior and press
5. Select default or alternative display mode and press
6. Select the appearance (full, half, short, off) and press
Note: On some screens fewer options are available.
7. Select Alternative display trigger and press
8. Select Long press P2 or off and press
Full label
to access the phonebook, etc.
.
. The configuration of the settings for all screens and
.
to save and return to the SmartLabel options menu.
66
Configuring the Function Keys
. The display mode will also
.
.
.