Deeplas ENVIROTILE Installation Manual page 12

8. ENVIROLAY INSTALLATION
8.1
ENVIROLAY RIDGE DETAIL
Always leave a 25mm gap each side of
the rafter ends at apex.
Note: The gap provided at apex will
provide the area for rising interstitial
moisture and condensation to escape
through the ventilated Envirotile main
roof ridge system.
ENVIROLAY ABUTMENT WALL DETAIL
Run the Envirolay to the wall face and
provide an uplift of material of at least
150mm. Use Duo Plus Tape ENVTAPE to
seal the overlap layers.
1 2 | E N V I R O T I L E
150mm min
I N S T A L L A T I O N
Uplift edge
G U I D E
25mm