Table of Contents
Advertisement
Service Instructions
MAN-02-08-77-0714-EN Rev. 2
8.2
Change Settings
Once the Setup Menu has been entered, the SMART EHO configurations can begin
to be changed.
8.2.1
Figure 33
8.2.2
8.2.3
Figure 34
Customizing Smart EHO Settings
To navigate through the SMART EHO settings, use the NO/YES Selector Knob.
A toggle of NO will move to the next setting. A toggle of YES will either enter a
setting or confirm a setting.
Change Settings (5)
Toggle the NO/YES Selector Knob to NO to navigate through the setup selections
until [C][H] displays on the Menu Key. [C][H] is the Change Settings Menu Key.
Toggle the NO/YES Selector Knob to YES to enter Change Settings.
Before settings can be viewed or changed, a Passcode is requested by the SMART
EHO. The Passcode's Menu Key is [P][C]. The Passcode is a four digit combination
of letters and/or numbers code that must be entered before accessing the
Change Settings Menu. The Passcode prevents unauthorized changes to the
SMART EHO's settings.
Change Settings (6)
Section 8: Customizing Smart EHO Settings
September 2020
51
Advertisement
Table of Contents
