Change Settings - Emerson Bettis 500 Installation And Operation Manual

Installation and Operation Manual
E2K-405-0218 Rev. 2
5.5

Change Settings

1.
2.
3.
Customizing Actuator Settings
Enter "SETUP" mode and use the selector knob (NEXT) to scroll to "CHANGE
SETTINGS?". Answer "YES." See Section 5.1, Entering Setup Mode.
Enter passcode.
NOTE:
A passcode must be entered to change settings.
Use the selector knob (NEXT/BACK) to scan the display for the desired setting to
change the following:
• Valve control setup
• Valve travel limits
• Discrete input
• Discrete output
• Inhibit and ESD
• Two-speed timer
• Analog
• Network
• Tag name
• Passcode
Section 5: Customizing Actuator Settings
February 2018
45