Emerson Bettis SMART EHO G Series Service Instructions Manual page 73

Service Instructions
MAN-02-08-77-0714-EN Rev. 2
Customizing Smart EHO Settings
MENU NAME
CALIBRATE UPPER LIMIT FOR ANALOG INPUT CHANNEL
Calibrate the the analog input channel with an external
current source. External current source needs to be
connected to source 20 mA equivalent signal when this
menu is being flashed. The signal has to be in the range
3.6 mA - 22 mA.
UPPER LIMIT VALUE CALIBRATED
(CALIBRATION STATUS)
If the input value is valid, the device will return success.
CALIBRATION FAILED (CALIBRATION STATUS)
If the input value is invalid, the device will return fail. The
SMART EHO will maintain the previous calibrated value.
ANALOG OUTPUT 1 CALIBRATION
Calibrate Analog Output 1 Channel
CALIBRATE LOWER LIMIT OF ANALOG OUTPUT 1
Calibrate the Analog Output 1 Channel for 4 mA
equivalent value. The Channel Output needs to be
monitored externally.
ANALOG OUTPUT 1 CALIBRATION CHOICE
Select if the Analog Output 1 needs to be
increased or decreased.
CALIBRATING ANALOG OUTPUT 1
The Analog Output can be changed based on selection
at cC menu. 'Yes' option at this menu means Accept
the Output. 'No' option at this menu will Increase or
Decrease the Output.
LOWER LIMIT CALIBRATED (CALIBRATION STATUS)
The Analog Output 1 channel is calibrated for the
desired output.
CALIBRATION FAILED (CALIBRATION STATUS)
Calibration for Analog Output 1 channel has failed.
The SMART EHO will maintain the previous
calibrated value.
CALIBRATE UPPER LIMIT OF ANALOG OUTPUT 1
Calibrate the Analog Output 1 Channel for 20 mA
equivalent value.
Note: The channel output needs to be monitored externally.
ANALOG OUTPUT 1 CALIBRATION CHOICE
Select if the Analog Output 1 needs to be
increased or decreased.
CALIBRATING ANALOG OUTPUT 1
The analog output can be changed based on selection at
[c][C] menu. 'Yes' option at this menu means the output
is accepted. 'No' option at this menu will increase or
decrease the output.
UPPER LIMIT CALIBRATED(CALIBRATION STATUS)
The Analog Output 1 channel is calibrated for the
desired output.
CALIBRATED FAILED (CALIBRATION STATUS)
Calibration for Analog Output 1 channel has failed.
The SMART EHO will maintain the previous
calibrated value.
ANALOG OUTPUT 2 CALIBRATION
Calibrate Analog Output 2 Channel
Section 8: Customizing Smart EHO Settings
MENU CONFIGURATION/
KEY CALIBRATION VALUE
iU Yes/No
cU N/A
cF N/A
o1 Yes/No
oL Yes/No
0 = Increment
cC
1 = Decrement
c1 Yes/No
cL N/A
cF N/A
oU Yes/No
0 = Increment
cC
1 = Decrement
c1 Yes/No
cU N/A
cF N/A
o2 Yes/No
September 2020
DEFAULT
ACTION
N/A
Analog Input
Calibration Status.
Not Searchable/
Configurable
Analog Input
Calibration Status.
Not Searchable/
Configurable
N/A
N/A
0 = Increment
N/A
Analog Input
Calibration Status.
Not Searchable/
Configurable
Analog Input
Calibration Status.
Not Searchable/
Configurable
N/A
0 = Increment
N/A
Analog Output 1
Calibration Status.
Not Searchable/
Configurable
Analog Output 1
Calibration Status.
Not Searchable/
Configurable
N/A
69