Table of Contents
Advertisement
3 - Description
Tank Level Indicator
MainTank
The actual liquid level in the MainTank can be observed on the MainTank
level indicator (A), where a plug (B) inside the tube follows the liquid
level, as it is connected to a float inside the tank.
The scale is displayed in litres - multiply by 100 for the reading.
Example: The plug floats at 10 on the scale; this means 1000 litres left in
the tank.
μ
ATTENTION! The level indicator is only a guidance for the liquid
level in the tank.
For the most accurate reading, park the sprayer on level ground
with the sprayer chassis in a horizontal position.
The total deviation of accuracy for the level for each scale mark or
readout value is:
• ± 15% for volumes up to 10% of the nominal tank volume.
• ± 7.5% for volumes between 10 and 20% of the nominal tank
volume.
• ± 5% for volumes above 20% of the nominal tank volume.
RinseTank
The actual water level in the RinseTank can be observed in the tube (C).
A yellow ball floating inside the tube indicates the water level.
• The ball is at the top of the tube: A full tank.
• The ball is at the bottom of the tube: An empty tank.
Canister for Pesticide Information
This canister is for storing information about the present pesticide
product in the tank - such as labels, instructions and safety data sheet
(SDS) from the pesticide supplier.
Information on other products used, such as herbicides, fungicides or
liquid fertilizer must also be stored here.
Unscrew the lid and store this information inside the canister at all times
when using the sprayer.
The canister is placed between the right side cover and the MainTank.
μ
ATTENTION! Although this canister is meant for storing of non-
contaminated items, it must never be used for storing food,
beverage or other items meant for human consumption.
68
Advertisement
Table of Contents
