Table of Contents
Advertisement
MITSUBISHI CNC
4 Connection
4.1 Precautions for Wiring
4.1.1 Precautions when Connecting/Disconnecting Cables
If the cable is connected/disconnected without turning the power OFF, the normal unit or peripheral devices could be
damaged, and risks could be imposed.
Disconnect each cable with the following procedures.
(a) For the following type of connector, press the tabs with a thumb and forefinger in the direction of the arrow, and pull
the connector off.
(2)
Pull
View from above
(2)
Pull
CAUTION
1. Do not connect or disconnect the cables between units while the power is ON.
2. Do not pull the cables when connecting/disconnecting it.
96
(1)
Press
(2)
Pull
(1)
Press
(2)
Pull
(1)
Press
(1)
Press
Advertisement
Table of Contents
