Connecting With Optical Communication Repeater Unit - Mitsubishi Electric M70V Series Connection Manual

4.2.6 Connecting with Optical Communication Repeater Unit

CAUTION
Optical Communication Repeater Unit cannot be used to connect between two Servo Drive Units.
(1) Connection example
Connect the control unit to OPT1IN and the drive unit to OPT1OUT.
Electric cabinet
Drive Units
L1: Distance between the drive unit and the control unit.
L2: Distance between the drive unit and the optical communication repeater unit. (The wire length of G380 cable)
L3: Distance between the optical communication repeater unit and the control unit. (The wire length of G380 cable)
<Related items>
Cable drawing "Cable: F070 Cable", "Cable: G380 Cable"
Connector pin assignment: "General Specifications: Optical Communication Repeater Unit" (DCIN connector,
OPT1IN connector, OPT1OUT connector)
Relay box
24VDC stabilized
power supply
ACIN
F070
DCOUT
Optical communication
repeater unit
DCIN
CF01
FCU7-EX022
G380
OPT1OUT
OPT2OUT
L1 : Max. cable length > 30m
L2 : Max. cable length < 30m
M70V Series Connection Manual
4.2 Connection of Control Unit
Operation panel
F070
FG
FG
DCOUT
G380
OPT1IN
OPT2IN
L3 : Max. cable length < 30m
24VDC stabilized
power supply
ACIN
DCOUT
FG
FG
Control unit
DCIN
OPT
111