Chapter 29: Removing The Power And Volume-Buttons Board; Prerequisites; Procedure - Dell Inspiron 17 7000 Service Manual

Removing the power and volume-buttons
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the coin-cell battery.
Procedure
1. Peel off the tape that secures the power and volume-buttons board cable to the palm-rest assembly.
2. Disconnect the power and volume-buttons board cable from the I/O board.
3. Remove the power and volume-buttons board cable from the routing guides on the palm-rest assembly.
4. Remove the screw (M2x3) that secures the power and volume-buttons board to the palm-rest assembly.
5. Lift the power and volume-buttons board off the palm-rest assembly.
Figure 22. Removing the power and volume-buttons board
1. power and volume-buttons board cable
computer. After working inside your computer, follow the instructions in
2. tape
Removing the power and volume-buttons board
29
board
After
www.dell.com/
49