Table of Contents
Advertisement
Removing the power and volume-buttons
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
1. Open the latch and disconnect the power and volume-buttons board cable from the I/O board.
2. Peel the tape that secures the power and volume-buttons board to the palm-rest and keyboard assembly.
3. Using a plastic scribe, pry the power and volume-buttons board, along with its cable, off the palm-rest and keyboard
assembly.
Figure 41. Removing the power and volume-buttons board
1. power and volume-buttons board cable
3. tape
computer. After working inside your computer, follow the instructions in
2. latch
4. plastic scribe
Removing the power and volume-buttons board
7
board
After working
www.dell.com/
17
Advertisement
Table of Contents
