Removing The Power And Volume-Buttons Board; Prerequisites; Procedure - Dell Inspiron 13-7375 Service Manual

Removing the power and volume-
buttons board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base
2 Remove the battery.
3 Remove the coin-cell

Procedure

1 Peel off the tape that secures the power and volume-buttons board-cable to the
palm-rest assembly.
2 Disconnect the power and volume-buttons board-cable from the I/O board.
3 Remove the power and volume-buttons board-cable from the routing guides on
the palm-rest assembly.
4 Remove the screw (M2x3) that secures the power and volume-buttons board to
the palm-rest assembly.
computer. After working inside your computer, follow
After working inside your
cover.
battery.
computer. For more safety best
www.dell.com/
Before
51